Flexeon LP-700 Reverse Osmosis System Pump-less
The Flexeon LP-700 Reverse Osmosis System is designed to treat 700 gallons per day. This system requirs a minimum of 70psi of incoming water pressure and a maximum TDS of 250ppm. The pump-less LP-Series provides lower optierational costs and is easy to install and maintain. Upgraded cover with pressure gauges and a 20″ floor stand also available. The Flexeon LP-700 Reverse Osmosis System is designed for pump-less light commercial applications up to 700 gallons per day (at a line pressure of 70 psi and max TDS of 250 ppm). System comes ready for immediate on-line service, minimal set up and little adjustment. The simple, high quality and proven design of Flexeon RO Systems have made these systems become known as turn-key, cost effective and reliable water purification systems.
Product Specifications
| DESIGN | LP-700 | ||||||||||||||||||||||||||||||||
| Configuration | Single Pass | ||||||||||||||||||||||||||||||||
| Feed Water Source (ppm) | TDS <250 | ||||||||||||||||||||||||||||||||
| Standard Recovery | 40% | ||||||||||||||||||||||||||||||||
| Rejection and Flow Rates | |||||||||||||||||||||||||||||||||
| Nominal Salt Rejection | 96% | ||||||||||||||||||||||||||||||||
| Nominal Product Water Flow | 0.5 / 1.9 | ||||||||||||||||||||||||||||||||
| Nominal Waste Water Flow(gpm/lpm) | 0.75 / 2.85 | ||||||||||||||||||||||||||||||||
| Connections | |||||||||||||||||||||||||||||||||
| Feed (in) | 3/8 Tube | ||||||||||||||||||||||||||||||||
| Permeate (in) | 3/8 Tube | ||||||||||||||||||||||||||||||||
| Concentrate (in) | 3/8 Tube | ||||||||||||||||||||||||||||||||
| Membranes | |||||||||||||||||||||||||||||||||
| Membrane Per Vessel | 1 | ||||||||||||||||||||||||||||||||
| Membrane Quantity | 2 | ||||||||||||||||||||||||||||||||
| Membrane Size | 3012 | ||||||||||||||||||||||||||||||||
| Vessels | |||||||||||||||||||||||||||||||||
| Vessel Array | 2(parallel) | ||||||||||||||||||||||||||||||||
| Vessel Quantity | 2 | ||||||||||||||||||||||||||||||||
| System Dimensions | |||||||||||||||||||||||||||||||||
| L X W X H ( in/cm) | 17 x 7.5 x 29 / 43.2 x 19 x 122.7 | ||||||||||||||||||||||||||||||||
| Weight (lb/kg) | 38 /17.1 | ||||||||||||||||||||||||||||||||
| *Product flow and recovery rates are based on feed conditions of 50 TDS at 77◦F at 70 psi. Treatment ability of the RO system is dependent on feedwater quality and feed pressure. Higher TDS and/or lower temperatures and/or pressure will reduce product flow.
Operating Limits
|
|||||||||||||||||||||||||||||||||
| Test Parameters: Static pressure tested.
* Appropriate Pre-filtration must be installed in order to prevent premature membrane fouling. *Scale prevention measures must be taken to prolong membrane life. |
|||||||||||||||||||||||||||||||||