Flexeon LP-700 Reverse Osmosis System Pump-less

Facebook Twitter LinkedIn Google+ Print this page
  • ID: #424
  • Add Favorites
  • Availability: 3 In Stock
  • $995.00

Flexeon LP-700 Reverse Osmosis System Pump-less


The Flexeon LP-700 Reverse Osmosis System is designed to treat 700 gallons per day. This system requirs a minimum of 70psi of incoming water pressure and a maximum TDS of 250ppm.  The pump-less LP-Series provides lower optierational costs and is easy to install and maintain.  Upgraded cover with pressure gauges and a 20″ floor stand also available. The Flexeon LP-700 Reverse Osmosis System is designed for pump-less light commercial applications up to 700 gallons per day (at a line pressure of 70 psi and max TDS of 250 ppm). System comes ready for immediate on-line service, minimal set up and little adjustment. The simple, high quality and proven design of Flexeon RO Systems have made these systems become known as turn-key, cost effective and reliable water purification systems.


Product Specifications

DESIGN                              LP-700
Configuration   Single Pass
Feed Water Source (ppm) TDS <250
Standard Recovery   40%
Rejection and Flow Rates
Nominal Salt Rejection 96%
Nominal Product Water Flow 0.5 / 1.9
 Nominal Waste Water Flow(gpm/lpm)  0.75 / 2.85
Feed (in)  3/8 Tube
Permeate (in) 3/8 Tube
Concentrate (in) 3/8 Tube
Membrane Per Vessel 1
Membrane Quantity 2
Membrane Size 3012
Vessel Array 2(parallel)
Vessel Quantity 2
System Dimensions
L X W X H ( in/cm) 17 x 7.5 x 29 / 43.2 x 19 x 122.7
Weight (lb/kg) 38 /17.1
*Product flow and recovery rates are based on feed conditions of 50 TDS at 77◦F at 70 psi. Treatment ability of the RO system is dependent on feedwater quality and feed pressure. Higher TDS and/or lower temperatures and/or pressure will reduce product flow. 


Operating Limits  

Design Temperature 77◦F Max. Turbidity NTU 1
Max. Feed Temperature 85◦F Max. Free Chlorine ppm 0
Max. Feed Temperature 50◦F Max. TDS ppm 250
Max. Ambient Temperature 120◦F Max. Hardness GPG 1
Min. Ambient Temperature 40◦F Max. pH (Continuous) 11
Max. Pump Inlet Pressure psi 85 Min. pH (continuous) 3
Min. Pump Inlet Pressure psi 45 Max.pH (Cleaning 30 min.) 12
Max. SDI Rating <1 Min. pH (Cleaning 30 Min.) 2
 Test Parameters: Static pressure tested.

* Appropriate Pre-filtration must be installed in order to prevent premature membrane fouling.

*Scale prevention measures must be taken to prolong membrane life.



Related Listing